Valuable Lessons I’ve Learned About Products

DIY Guide in Building Solar Hot Water Heater

Are you aware of the fact that the water heaters that we have at home consume more energy compared to the other electrical and household appliances and devices combined? Are you searching for ways to reduce your electricity consumption? Should you be one of these men and women, then the best method to conserve energy in using water heaters is to construct your own solar hot water heater. Is this possible? For those who are interested to learn about these solar water heaters and how to build one, then be sure to peruse this article further.

Why Use Solar Energy in Powering Water Heaters?

Solar energy is utilized in this particular project simply because it is not only affordable but it is also deemed as among the cleanest renewable energy source these days. Since solar energy does not emit carbon dioxide, it is does not harm Mother Nature.

Researchers found that solar hot water heater has the capability of reducing your heating costs by around 50%. So, should you be searching for effectual method to reduce your monthly electricity bill, then you can consider constructing your own solar water heater. It is a reality that constructing your own solar-powered water heater is deemed as the best way to decrease you electricity bill and consumption monthly. Implementing sustainable methods is the surest and the most effective method to save money. Detailed below are guidelines on how you can construct your own solar-powered water heater.

How the Solar Hot Water Heater Works?

Same with the traditional water heater, the solar-powered water heater has a water tank and heating coil. The water is pre-heated by trapping the rays of the sun inside the water tank and the heating coil. The heated water then passively flows to the water pipes in your bathroom and kitchen.

Steps in Constructing Solar Hot Water Heater

1. The first thing that you need to do is to construct a box. You can do it using 2x4s of strong particle board or plywood. Make sure that you construct a box that is large enough to contain the full-size water heater. The box should measure about seven feet long four feet wide and five feet tall. It is also suggested that you construct and place the box at 30-degree angle so as to collect enough amount of sunlight from the sun.

2. Be sure to insulate the interior portion of the water heater using sturdy insulation material.

3. It is also needed that you install reflective material above the insulation material with the use of roofing galvanize tin. You are advised to shape and to form the reflective material like a huge metal cradle and do not forget to secure the edges and sides with the use of nails of staples. This curved tin serves as a catcher that will catch the rays of the sun and then relay it to the water heater.

4. Insert the water heater inside the box and cut holes at the bottom of the box to serve as blow-out emergency nozzle.

5. Make sure that you cover your gigantic box with the utilization of the outdoor-grade glass. You should secure the sides of the box by placing sturdy wood sealant on it.

6. Be sure to connect the solar-powered water heater to the water heater inside your house.

Cite: over here