You are redoing your home and just love the look of wood floors. Excellent choice! However, the numerous options leave your head spinning—how can you make sense of it all? Think of the three main categories, then narrow it down from there.
This is the kind of wood flooring that started it all, each piece consisting of wood that was scraped and sanded. When restoring an older home, especially a historic building, this may be the best choice to preserve authenticity. One advantage of solid wood is that it can be refinished endlessly—but a clear disadvantage is that it may need to be refinished endlessly. Natural wood floors are generally suitable for living spaces but not ideal around water, making this a poor choice for kitchen and bathroom renovations.
Generally considered the best choice in flooring, engineered wood offers the warm beauty of genuine wood with the advantages of superior technology. With engineered wood, all you see is gorgeous sawn wooden planks. The real beauty lies underneath in the plywood layer, which offers temperature stability and humidity resistance. Some lines, such as the monarch plank Windsor collection, are backed with marine-grade birch plywood and finished with a smooth urethane finish, making this collection perfect even in kitchens and bathrooms. Engineered woods offer a variety of installation methods and are often available in a range of price points.
Wood-look Laminate Sense
The most budget-friendly of the options, laminates are growing in popularity for their durability and easy maintenance. Like other laminates, these floors are constructed by taking layers of compressed fiber and topping them with a photograph (in this case a photograph of wood) and a final coating of plastic. However, there may be issues. While laminates are often advertised as indistinguishable from real wood, repeated images may become noticeable in a living-room-sized expanse of floor. More importantly, it is rare but some batches of laminate flooring have been shown to have potentially harmful levels of formaldehyde, so if you do choose this type, be sure to take steps to mitigate this possibility.…
Why You Need Electricians With Comprehensive Knowledge for Industrial Wiring Projects
Electricians play more of a key role in commercial and industrial construction than you might think. Below are a few of the basics that are required when it comes to wiring essentials and why you need to have experts on the job.
Interior and Warehouse Lighting
Hallways, bathrooms, offices, waiting areas, warehouse, and production floor areas all need to be well-lit during operation for the safety of employees and customers. Poor lighting can lead to injuries or damaged products and supplies.
Equipment Power Supplies and Charging Stations
You need an expert electrician to put in place the wiring necessary for equipment that needs continual electrical supplies and an area to establish a base for a charging station. Staying operational will be dependent on your equipment working on demand.
Field and Outdoor Security Lighting
Parking lots, supply yards, company vehicle storage, and the outside of your building will need to be well-lit to help prevent thieves and vandals from accessing anything unnoticed. Help keep your entire property safe and crime-free trough preventative measures with quality outdoor lighting.
Electronic Device and Office Equipment Power Access
One of the biggest struggles in the modern age is having enough outlets to plug in electrical devices and office equipment. Make sure you plan this well with your chosen electrician and have all the power access sources you need from the start.
Electrical Supplies to Signs and Continued Maintenance
Many industrial property owners opt to place lighted signs on the side of the buildings or on erected poles. Wiring will have to be installed to power the lights and ongoing maintenance is needed to ensure all portions stay lit. You need the electrical services Richardson commercial and industrial operations trust to keep their company visible all night long.
The scope of work required in the mere task of wiring an industrial property to have the right electrical service access can be beyond the scope of a regular electrician. Make sure you hire a service that has the expertise and equipment it takes to get everything done right.…
There’s really nothing nicer than the sound of water. Waves lapping against the shore, or a babbling brook, or the simple sound of rain on the surface of a lake. A well-designed and well-maintained lake or pond can be very pretty indeed, but the emphasis there has to be on well-designed and well-maintained. These are just a few things to consider when contemplating adding a water feature:
Oxygenating your waters is an important part of pond maintenance and shouldn’t be neglected. Aeration systems are a good example of how a waters feature can balance aesthetic and functionality. Whether it’s a lit fountain statement piece or a subsurface diffuse system, aeration keeps a pond healthy and clear, as well as making a visual impact.
Stocking and Planting
A healthy waters feature is a living water feature, with its own ecosystem that fits in with the environment. Fish, other aquatic animals, and plants are all part of that ecosystem. A water feature that looks good can also be good for the environment. So make your stocking and planting choices with care.
Finally, have a plan to deal with weeds and algae in the summer, as well as ice in the winter. Waters features present unique challenges for maintenance, since it’s not like you can just mow the weeds that grow in your pond, and ice buildup can damage or even destroy an aeration system if it’s not properly cared for.
A Water Feature that Works
The trick is finding a waters feature that works for your needs, and will continue to work year round. Whether for home or business, water features can make or break your landscape design. A waters feature can elevate the look of your home or business. But it needs to be the right water feature and it needs to be properly maintained.…
Easy and Simple Tips
After awhile, even the most beautiful home can start to feel stale if you’ve lived there for awhile and haven’t changed up its look. You don’t have to completely overhaul your home to breathe new life into it, however. Even a few small, simple changes can refresh your home’s look and make it look and feel fabulous. Here are a few simple tips you can follow to spruce up your home and make is showroom ready.
Lighting is a key component to a beautiful home. Without the proper lighting, your home can feel dark and dreary. There are several tips you can use to spruce up your home’s lighting clearwater fl and make your room look great. Take advantage of large windows for natural lighting and use several types of lighting to give your rooms different levels of lighting.
A fresh coat of paint can take any room to the next level. An added bonus to painting a room is that it generally isn’t expensive to do and can really change the ambiance in a room. If your home is feeling a little drab, add a fresh coat of paint and breathe life back into your space.
If your home is feeling stale, consider swapping out your small decor items to add some new interest to your space. Hang a new piece of art, add a potted plant, or display a cool antique find from an estate sale to your space for a fun conversation piece that looks great.
Sometimes, adding a plant or two to a room can give you the change you’re looking for without having to spend a lot of money. If you have pets, be careful about what plants you buy as some house plants can be poisonous to pets.
Updating your home’s decor can be done in a weekend. Using these simple tips, you can make your home look and feel great without being too expensive.…
These days coloring the concrete surfaces both old and new using acid stains (also called reactive stain or chemical stain) is very popular because of its unique looks and cost effectiveness. Acid staining is a process in which an aqueous solution of metallic oxides and inorganic acid is sprayed over an existing concrete surface. The acidic solution of metallic oxide reacts with lime (Calcium Hydroxide) present in the concrete yielding insoluble, colored compounds that become a permanent part of the concrete. Therefore, one of the basic conditions where coloring concrete using acid stains is going to work is the presence of lime in the concrete. Quiet often people who have just bought a home or condo, remove the carpeting or vinyl tile, and find something underneath which they believe is concrete. When they spray the acid stain or reactive stain and wait to get disappointed because they do not see any change in the color on their concrete surface. This is because the substrate that looks like concrete is in fact gypsum based ‘Gypcrete’. Builders often use this on upper floors to level out areas of sub flooring and provide a good base for other types of floor coverings. Unfortunately, staining Gypcrete does not produce any desirable results since it does not contain any lime; moreover it is too soft and easily abraded. Therefore ‘Gypcrete’ cannot be used as a wear layer.
Since Gypcrete surfaces cannot be used as a wear layer and acid stains do not work on them, it is usual practice to apply a 1/16inch polymer modified concrete resurfacing material (also called micro-topping or skim coat). Please find below the steps involved in resurfacing Gypcrete and acid staining with a micro-topping or skim coat –
a. Sweep the Gypcrete surface and dry vacuum the surface thoroughly. Rake out the joints where drywall meets the floor. Clean the adjoining areas even those not being resurfaced with a micro-topping.
b. Install masking paper (plastic) at least 48″ high on the surrounding walls. Spray a light mist of water just to damp the surface (DO NOT FLOOD!)
c. Using a brand new rayon mop, apply the first coat of acrylic primer (Cp1000) after diluting it with water @ 1:1 ratio. After waiting for at least 60 minutes, apply second coat of diluted acrylic primer and let it cure overnight (or 10 hours at least) before proceeding to the next step.
d. Apply another coat of acrylic primer, this time non-diluted and let it dry for 30-60 minutes. The third coat of primer can be applied using garden sprayer (i.e., available in Home Depot or Lowes).
e. Apply a thin coat (1/16″) coat of micro-topping or polymer modified overlay using magic trowel. Please follow the link for specific instruction on application of polymer modified micro-topping, Sgraffino. Allow the micro-topping to cure for at least 24 hours. In damp and cold conditions (basements), wait for at least 48 hours before proceeding to the next step.
f. Apply acid stain on the completely dried micro-topping. Please follow the link for specific instruction on application of an acid stain, Patinaetch. Allow the acid stained surface to dry for at least 24 hours before proceeding to the next step.
g. The micro-topping needs to be protected with a good quality sealer. Apply one coat of water based epoxy sealer, Perdüre E32 followed be another coat of water based polyurethane, Perdüre U46. Allow at least 6 hours between the application of epoxy primer and polyurethane topcoat. The sealed surface will be ready for use after 24hours. Of course, it takes at least 3 days for full cure.
Making a mind for installing a floor in your house? Do not get confused; simple and durable flooring you can opt for is there. Vinyl flooring is one of the finest choices keeping in view the long lasting quality and its affordability. Especially when you are considering flooring of bathrooms and kitchen, vinyl floor is the best option. Trend of installing vinyl floor is increasing day by day. Not only the durability and affordability is the major reason but also it has a wide range to select from. There are various designs, colors and types and the prices depend on the quality and material used in manufacturing. Let’s discuss in detail the characteristics of this flooring.
Introduction To Vinyl Floor:
Vinyl floor is basically a building material made of polyvinyl chloride called PVC. It is made of engineered products instead of original material. Similar to linoleum but is more durable. It can be used in commercial areas like offices, shopping malls as well as in residential areas like bedrooms as well as kitchens and bathrooms.
Types Of Vinyl Floor:
There are basically two types of this flooring. One is called printed vinyl and the other is inlaid vinyl. Printed contains a thin sheet of vinyl and has a coating of printed-paper. It is cheap in cost and is not much durable, while the inlaid vinyl is thicker in sheet strength and is expensive. Both are available in the market in form of sheets as well as tiles.
Advantages Of Vinyl Floor:
Vinyl is less cost, long lasting and easy to maintain flooring. It is highly resistant to moisture and this quality makes it best option for the bathrooms and kitchen flooring. It can be the great flooring for heavy traffic areas like offices, shopping centers and schools. It’s underlay gives comfort to the foot and add insulation.
Disadvantages Of Vinyl Floor:
One of the major drawbacks of vinyl floor is that it cannot be refinished or polished. Over time when it looses its luster it looks dull and it can wear down. Though it is less in cost from other flooring but have short life comparatively. It is also sensitive to sunlight and cold and can get fade or crack.
When choosing for vinyl floors consider installation, cost and type of vinyl. Use inlaid vinyl flooring for heavy traffic areas like shopping centers, offices and schools. Printed vinyl floor is best for low traffic areas like personal bedroom. Use tiles if you want more designs and it is also easy to install on your own. But if you have tight budget go for vinyl sheets, as it is less in cost than tiles.
When you go shopping for an iron umbrella stand it is helpful if you know what kind of style you would like. There are so many on the market and they verge from the cheap and cheerful mass produced cast iron versions right through to the antique wrought iron ones made in the Victorian age.
Wrought iron pieces were once the sign of wealth and were very popular in the gardens and mansions of the elite. Talented blacksmiths spent weeks hand crafting these pieces and working with the iron until they had achieved a beautiful result. You can find some of these fantastic pieces at real bargain prices as often they have not been looked after. Covered in rust, they can look like too much work to bring back to their natural beauty. Often people will decide to buy a new iron umbrella stand rather than the antique.
But it doesn’t actually take that much work. You simply need a drill with the wire brush attachment, some sandpaper, a smaller hand held wire brush and a lot of patience. When you have taken the initial rust off you will need some primer, a rust inhibitor and finally some paint. You begin by removing the rust which you can do with the drill so long as you take things very slowly. You will need to use the sandpaper and hand held brush on the more intricate engravings. Once you have removed the rust and have achieved a smooth surface you will need to paint the piece with a rust inhibitor. An iron umbrella stand does attract rust as you tend to either use it outdoors or place wet umbrellas in it so protecting it in this way is very important. Then just prime the piece and apply a coat of paint and you will own a beautiful object.