• Preventing Plumbing Problems this Holiday Season

    Preventing Plumbing Problems this Holiday Season

    Dealing with plumbing problems can be a huge headache, but dealing with them during the holiday season can be a nightmare. Instead of enjoying the time with your family and friends, you will have to worry about how you will get your drain unclogged or stop your toilet from running. On top of this, many services are not available during the holidays, which will lead you to having to wait for a couple of days before someone can come out to fix your problems. Fortunately, there are ways to prevent all of this from happening, and the best way to do this is to prevent plumbing problems. Listed below are a few ways to prevent plumbing problems this holiday season.

    Plumbing

    Avoid pouring cooking grease in the drain

    During the holiday season, there will be lots of cooking, and much of the cooking may include the use of cooking grease. However, if you pour cooking grease into the drain, it will clog and harden. Once this happens, then your drain will probably get clogged. In order to prevent this, you can pour your cooking grease into an empty bottle and dispose of it in the trash.

    Invest in plumbing drain screens

    Another way to prevent plumbing problems is to invest in drain screens. One of the great things about drain screens is not only do they help with potential plumbing problems, but they are inexpensive. The benefit of drain screens is that they will prevent particles from clogging the drain. There are times in which hair, food, or other particles will go down the drain. By having a drain screen, all of these particles will be caught before they do damage to your drain.

    Use baking soda treatments

    Although there are lots of toxic drain openers, there are other ways to open your drain. With the toxic drain opener, you can often do additional damage to your drain. Therefore, there are home treatments that do not involve this level of toxicity. One home treatment is to use baking soda. All you need to do is sprinkle a little baking soda in the sink and tub drains and then rinse it with warm water. Also, vinegar can also play a huge role in unclogging drains. If your drain becomes too clogged, you may have to consider sub-slab leak detection in order to make sure that the leak is not below the slab.

    Install a washing machine screen

    Similar to drain screens, washing machine screens will help to prevent materials from clogging the washing machine’s valves. It is important to keep a check on the screens. By doing this, you will know when it is time to replace them.

    This holiday season it is important to avoid plumbing problems. While you never know when you may have a plumbing problem, taking steps to prevent problems will decrease the likelihood that you will have to deal with this during the holidays. Taking a few extra steps today will lead to less stress in the future.…

  • Content material API For Buying

    Content Material API For Buying

    The overall terms and circumstances of shopping described below, (hereinafter Common Terms and Circumstances), govern the enterprise relations between all users of the website (hereinafter user”) and the company IvyHealth S.L., with Fiscal Id no. B95831897, the owner of , with registered address in Gran Vía forty five, 1a planta, dept. Specialty merchandise are unique and shoppers will not settle for any substitutions. Homogeneous products are perceived by customers as very related in nature and the ultimate purchase is normally decided on the lowest value. Marketers promote these material products to a small target market by restricted distribution channels to add to the exclusiveness of the product.

    Material

    In contrast, purchasing items are gadgets that customers want to be able to evaluate and distinction with others before they make a purchasing decision. Customers are willing to go to some lengths to check high quality by setting an standards to evaluate the product’s specs, usage, worth, and value.

    Though these merchandise may be customized-made (e.g. a hairpiece) or one-of-a-kind (e.g. a statue), it is usually potential that the marketer has been very profitable in differentiating the product within the thoughts of the consumer. Another sort of shopper merchandise might be categorised as merchandise you don’t want, like candy, luxurious goods, and toys. You can get special discount price Up To 50% Off @Dealvoucherz.

    Conclusion

    For example, The United States Consumer Product Safety Act (CPSA), enacted in 1972 by Congress, has an extensive definition of client product: any article, or component part thereof, produced or distributed (i) for sale to a shopper for use in or round a permanent or short-term household or residence, a college, in recreation, or in any other case, or (ii) for the private use, consumption or enjoyment of a client in or around a everlasting or short-term household or residence, a college, in recreation, or in any other case; however such time period doesn’t embrace— (A) any article which isn’t usually produced or distributed on the market to, or use or consumption by, or enjoyment of, a shopper”.

    There are 4 forms of consumer merchandise, and they are convenience, buying, specialty, and unsought. For probably the most half, producers of speciality goods sell their products on the idea of product high quality, reliability, and picture, slightly than on the idea of price.…

  • The History and Benefits of Cafe Shutters

    The History and Benefits of Cafe Shutters

    If you’re looking to make home improvements related to your windows, you have a lot of options. Some of these depend upon where the window is located in the house (which side of the house, which floor of the house, etc). While others are down to personal preference benefits or features that you consider must-haves for your windows.

    How Cafe Shutters Can Brighten Your Home

    The History and Benefits of Cafe Shutters

    If your goal is to let in a lot of light while maintaining some measure of privacy, you might consider cafe style shutters for your ground floor windows. Their design allows for a lot of natural light to enter via the top half, while a beautifully-crafted screen maintains privacy on the lower portion. Many people like this style due to its versatility and ease of use and installation.

    Cafe shutters got their start in Europe but came to the new world via the Spanish. They were widely used for a long time after thanks to being cheaper than the glass options of the day.

    Window Transom

    While it is easy to think of such shutters as simply half the size of “ordinary” shutters, it’s recommended to install them by matching them to the highest point of your window’s transom. You don’t want to end up with shutters of any type that don’t really match the feel and look of the window and throw off the whole aesthetic. Taking such measurements is also practical as it ensures the windows are used to their fullest capabilities with no unnecessary overlap.

    Best of all, you can still use them in the same way as a full height shutter, with positioning in both open and closed states and adjusting their louvers to allow more light. However, it is most typical to only adjust the slats instead of fully opening the window, since you have full lighting from the top portion.

    As we touched on previously, it’s best if cafe shutters suit the window frame and the surrounding decor to ensure uniformity and an aesthetically-pleasing look. Another consideration is location. This style is ideal for keeping things private at eye level but in addition to light, can let in a lot of nice breezes if the shutters are installed in an area that allows outdoor air to circulate well.

    Conclusion

    And while it’s mostly a question of looks, be sure to take some time to consider what sort of materials you want for these shutters. The most popular choices tend to be a variety of hardwoods, and which one is usually dependent upon again, the type of window and decor in the location. There are also a few less common material types that are better suited to different areas of the home. Some people like having these shutters in their bathrooms, and so will opt for synthetic materials that give extra protection against moisture while still allowing for all of the benefits of the cafe style. Whatever the type of home or room, you should always check some of the tips on how to choose the right shutters for your home.

    In short, this style provides many benefits and very few drawbacks. As long as they fit with the window and decor of your home, simply choose materials, colors or finishes that work well for you. Once installed you can enjoy lots of natural light, without sacrificing privacy.…

  • How to Acid Stain Gypcrete Or Any Gypsum Based Underlayments

    These days coloring the concrete surfaces both old and new using acid stains (also called reactive stain or chemical stain) is very popular because of its unique looks and cost effectiveness. Acid staining is a process in which an aqueous solution of metallic oxides and inorganic acid is sprayed over an existing concrete surface. The acidic solution of metallic oxide reacts with lime (Calcium Hydroxide) present in the concrete yielding insoluble, colored compounds that become a permanent part of the concrete. Therefore, one of the basic conditions where coloring concrete using acid stains is going to work is the presence of lime in the concrete. Quiet often people who have just bought a home or condo, remove the carpeting or vinyl tile, and find something underneath which they believe is concrete. When they spray the acid stain or reactive stain and wait to get disappointed because they do not see any change in the color on their concrete surface. This is because the substrate that looks like concrete is in fact gypsum based ‘Gypcrete’. Builders often use this on upper floors to level out areas of sub flooring and provide a good base for other types of floor coverings. Unfortunately, staining Gypcrete does not produce any desirable results since it does not contain any lime; moreover it is too soft and easily abraded. Therefore ‘Gypcrete’ cannot be used as a wear layer.

    Since Gypcrete surfaces cannot be used as a wear layer and acid stains do not work on them, it is usual practice to apply a 1/16inch polymer modified concrete resurfacing material (also called micro-topping or skim coat). Please find below the steps involved in resurfacing Gypcrete and acid staining with a micro-topping or skim coat –

    a. Sweep the Gypcrete surface and dry vacuum the surface thoroughly. Rake out the joints where drywall meets the floor. Clean the adjoining areas even those not being resurfaced with a micro-topping.

    b. Install masking paper (plastic) at least 48″ high on the surrounding walls. Spray a light mist of water just to damp the surface (DO NOT FLOOD!)

    c. Using a brand new rayon mop, apply the first coat of acrylic primer (Cp1000) after diluting it with water @ 1:1 ratio. After waiting for at least 60 minutes, apply second coat of diluted acrylic primer and let it cure overnight (or 10 hours at least) before proceeding to the next step.

    d. Apply another coat of acrylic primer, this time non-diluted and let it dry for 30-60 minutes. The third coat of primer can be applied using garden sprayer (i.e., available in Home Depot or Lowes).

    e. Apply a thin coat (1/16″) coat of micro-topping or polymer modified overlay using magic trowel. Please follow the link for specific instruction on application of polymer modified micro-topping, Sgraffino. Allow the micro-topping to cure for at least 24 hours. In damp and cold conditions (basements), wait for at least 48 hours before proceeding to the next step.

    f. Apply acid stain on the completely dried micro-topping. Please follow the link for specific instruction on application of an acid stain, Patinaetch. Allow the acid stained surface to dry for at least 24 hours before proceeding to the next step.

    g. The micro-topping needs to be protected with a good quality sealer. Apply one coat of water based epoxy sealer, Perdüre E32 followed be another coat of water based polyurethane, Perdüre U46. Allow at least 6 hours between the application of epoxy primer and polyurethane topcoat. The sealed surface will be ready for use after 24hours. Of course, it takes at least 3 days for full cure.



    Source by Victor Pachade

  • Characteristics Of Vinyl Flooring

    Making a mind for installing a floor in your house? Do not get confused; simple and durable flooring you can opt for is there. Vinyl flooring is one of the finest choices keeping in view the long lasting quality and its affordability. Especially when you are considering flooring of bathrooms and kitchen, vinyl floor is the best option. Trend of installing vinyl floor is increasing day by day. Not only the durability and affordability is the major reason but also it has a wide range to select from. There are various designs, colors and types and the prices depend on the quality and material used in manufacturing. Let’s discuss in detail the characteristics of this flooring.

    Introduction To Vinyl Floor:

    Vinyl floor is basically a building material made of polyvinyl chloride called PVC. It is made of engineered products instead of original material. Similar to linoleum but is more durable. It can be used in commercial areas like offices, shopping malls as well as in residential areas like bedrooms as well as kitchens and bathrooms.

    Types Of Vinyl Floor:

    There are basically two types of this flooring. One is called printed vinyl and the other is inlaid vinyl. Printed contains a thin sheet of vinyl and has a coating of printed-paper. It is cheap in cost and is not much durable, while the inlaid vinyl is thicker in sheet strength and is expensive. Both are available in the market in form of sheets as well as tiles.

    Advantages Of Vinyl Floor:

    Vinyl is less cost, long lasting and easy to maintain flooring. It is highly resistant to moisture and this quality makes it best option for the bathrooms and kitchen flooring. It can be the great flooring for heavy traffic areas like offices, shopping centers and schools. It’s underlay gives comfort to the foot and add insulation.

    Disadvantages Of Vinyl Floor:

    One of the major drawbacks of vinyl floor is that it cannot be refinished or polished. Over time when it looses its luster it looks dull and it can wear down. Though it is less in cost from other flooring but have short life comparatively. It is also sensitive to sunlight and cold and can get fade or crack.

    When choosing for vinyl floors consider installation, cost and type of vinyl. Use inlaid vinyl flooring for heavy traffic areas like shopping centers, offices and schools. Printed vinyl floor is best for low traffic areas like personal bedroom. Use tiles if you want more designs and it is also easy to install on your own. But if you have tight budget go for vinyl sheets, as it is less in cost than tiles.



    Source by Imran Al

  • Refinishing Your Iron Umbrella Stand Back To Beautiful

    When you go shopping for an iron umbrella stand it is helpful if you know what kind of style you would like. There are so many on the market and they verge from the cheap and cheerful mass produced cast iron versions right through to the antique wrought iron ones made in the Victorian age.

    Wrought iron pieces were once the sign of wealth and were very popular in the gardens and mansions of the elite. Talented blacksmiths spent weeks hand crafting these pieces and working with the iron until they had achieved a beautiful result. You can find some of these fantastic pieces at real bargain prices as often they have not been looked after. Covered in rust, they can look like too much work to bring back to their natural beauty. Often people will decide to buy a new iron umbrella stand rather than the antique.

    But it doesn’t actually take that much work. You simply need a drill with the wire brush attachment, some sandpaper, a smaller hand held wire brush and a lot of patience. When you have taken the initial rust off you will need some primer, a rust inhibitor and finally some paint. You begin by removing the rust which you can do with the drill so long as you take things very slowly. You will need to use the sandpaper and hand held brush on the more intricate engravings. Once you have removed the rust and have achieved a smooth surface you will need to paint the piece with a rust inhibitor. An iron umbrella stand does attract rust as you tend to either use it outdoors or place wet umbrellas in it so protecting it in this way is very important. Then just prime the piece and apply a coat of paint and you will own a beautiful object.



    Source by Chris Hartpence

  • SAP Software Measurement Reports in 10 Easy Steps

    It’s quite understandable that you had a hard time making decision to procure the SAP software considering cost and business renovation according to the system. Then, after many months of planning and implementation go through, you finally GoLive and try to find some room to relax. But, in no time you almost spend a calendar year, so here comes annual SAP official license audit. You will start receiving mails from SAP audit team members to complete the reports by given date. Actually you are not ready for all these measurement parameters to count so early. But as you have already signed the agreement with SAP, you should perform these steps in due time. So, you will soon start working with some new terms like USMM, SLAW etc.

    So what is USMM?

    USMM is the Tcode for the measurement program. By using this tool, you can determine all users license classification as per your procured SAP application and also the number of engines powered in each system. Then you can transfer the report online, directly to SAP.

    Now, what is LAW?

    LAW stands for License Administration Workbench, sounds bit tough though. Tcode for running this tool is SLAW. You can consolidate each system measurement reports by this program and send directly to SAP.

    So are you ready to prepare your first measurement reports? Surely you are. Before proceeding to USMM, you must consider the following points –

    – Check on SAP Service Market Place that you have all valid System Installations. Delete any unused or invalid installation without proper license.

    – Check at, SAP Market Place -Data Administration -System Data

    – Make sure you are the authorized person to do this, duly assigned by your company.

    – Check your authorization profile on each system, that you have proper authorization to run USMM.

    – Measurements should be done for Production, Development & Test Systems, that means you have to exclude IDES (Training) systems and any Backup systems.

    – Prepare your measurement plan according to you Contract number, Installation/Customer number and System identification.

    – Consult with your regional SAP LAW Team for all kind of assistance. Yes, they are available and very helpful in the matter no doubt.

    SAP System measurement procedure on Development Systems:

    1. Run the transaction code USMM.

    2. Select ABAP DEV Client ON Clients tab.

    3. Go to Price lists tab and select the applicable price list as per your contract.

    4. Select User types. SAP Application Developer (CA) and Test (91).

    5. On the Addresses tab, enter senders name & recipient name.

    6. Now the most important part, User Classification. Run the query by clicking on ‘User classification’ (Shift+F6). Enter ABAPer client and execute (F8). This will show a list of all users according to license. Select SAP Application Developer(s) /ABAPer(s) as per your number of ABAP Developer license(s) and assign all other users as ‘Test’ user type. Be sure that ‘Checked user Type’ completely matched with ‘Manual User Type’. If any mismatch found, re-classify by selecting all mismatched users and click on ‘Classify Selected Users’ (Shift+F1). Select Contractual User Type from drop down menu and click on Save icon (Ctrl+S). Then run the query again to check all user classification is accurate. Now back to main USMM screen (F3).

    7. As it seems like you have configured the parameters correctly, now it’s time to execute the main query, the ‘System Measurement’, click or just press F8. It will take around 5 to 15 minutes to complete all background job processes, depending your system and number of users. So, just sit back and have a cup of coffee in the meantime.

    8. Check the ‘Measurement Statistics’ that all data is as per your configuration.

    9. Click on ‘Comments’, if you want to send a Memo to SAP along with the measurements.

    10. Finally, send your measurement results online to SAP by clicking on ‘Send to SAP’ or just press F10.

    Now be sure that your SAP Router is active to complete the online transfer of reports. You can check the online transfer process by using the tcode SDCC or, SDCCN, will be discussed later. In case of LAW consolidation, export the measurement report. Go to top horizontal menu, System Measurement -Export to LAW File (Ctrl+F10). Then from Data Transfer Selection, select ‘By Download to file’ and click execute (F8). Save the txt file in your computer for later import in LAW consolidation. You can also transfer by choosing RFC to LAW Center or By Email, but in reality downloading as a txt file is the easiest way to proceed.

    Now that you have completed the hard work, wait for your SAP License Auditor to response over email. They will come up with specific suggestions whether you need any correction on selection or re-classification of users. …